Yesterday my Ellegante 2 decided it did not want to embroidery anymore. The upper thread wants to show on the bottom and it is very very loose. I have not done anything different than I normally do. I have tried everything I can think of. changing the needle adding more stabilizer, changing thread, I even changed the tension which I have never had to do and still nothing works. When I switched it back to normal sewing it was doing the same thing. I seemed to have gotten that working but not the embroidery. Can anyone help?

Views: 108

Replies to This Discussion

Patrice did you break a needle?
Patrice and Barb, the question is did your needle break? Because if it did then I can probably help you. Cheryl
no the needle didn't break.
You may want to change out the bobbin casing. The machine comes with two, a pink one and a green one. My needle accidentally hit the case and it messed up the case which messed up my embroidery the way you have described it. When I changed it out, no more thread looping etc. I would suggest you try this before taking it in. Let me know if that works for you.
thank you. I didn't try that. I will do that today. keeping my fingers crossed!

Cheryl Kuch said:
You may want to change out the bobbin casing. The machine comes with two, a pink one and a green one. My needle accidentally hit the case and it messed up the case which messed up my embroidery the way you have described it. When I changed it out, no more thread looping etc. I would suggest you try this before taking it in. Let me know if that works for you.
Well that didn't work either. I guess it is off to the shop for it

RSS

© 2019   Created by Shawn Knight.   Powered by

Badges  |  Report an Issue  |  Terms of Service